Bumblebee CPE Local Diagnostics Portal
- Sherry Wei
- Aug 3
- 1 min read
The ETH3 port of A Bumblebee CPE is reserved for the diagnostics purpose.
A HTTP web page and DHCP server run on this port. To Access the diagnostics portal web page, connect the ETH3 port of the CPE to your laptop, and type: http://169.254.1.1:8080, as shown below.
On the diagnostics portal, you can view status, change basic configuration, conduct ping test and perform disaster recovery when the CPE loses connection to the portal due to mis-configuration.
Comments