This document describes how to access remote devices over IP networks from the Bumblebee portal.

The SIM card must be inserted into the SIM slot in the correct orientation, and after the insertion, the device must be power rebooted for the CPE to detect the SIM.

The SIM card must be inserted into the SIM slot in the correct orientation, and after the insertion, the device must be power rebooted for the CPE to detect the SIM.

This document answers the question: “We already have a firewall. Why do we need Bumblebee CPE?”

This document describes the privileged functions available only to root account owners.

In the Bumblebee DIA architecture, data path is unchanged from the existing architecture. What is removed is the entire management network.

This document lists a set of commonly used API functions.

This document provides an example of how to configure a webhook on the Bumblebee platform.

Bumblebee Cellular WAN FAQ

The Secondary WAN provides a backup WAN link via the Bumblebee CPE's ETH3 interface to increase a site's Internet uptime. When the primary WAN (ETH0) goes down, the Bumblebee CPE automatically begins forwarding traffic through the Secondary WAN. The Secondary WAN can be from a different ISP. Below is a deployment diagram. The Secondary WAN deployment diagram Deployment Requirements The primary WAN (ETH0) should be in Pass Through Mode, for example, a /29 DIA circuit. The seco

This document shows you how to use Bumblebee platform to manage switched PDUs deployed at the customer sites.

This article explains how Bumblebee platform provides the OOB (out-of-band) remote serial console access to these remote devices.

This document explains how to create event notifications to alert all parties when an event such as WAN outage occurs.

Bumblebee troubleshooting cheatsheet

This document describes to how to deploy two firewalls for HA.

Support Center is a service on the Bumblebee platform that allows customers to file support tickets and providers to correspond with the customers on the tickets until the customers resolve them.

Application Visibility is part of the Intelligent Edge Dashboards.

This is a case study of a customer's journey to modernizing their Internet connectivity and how visibility helps them move forward

The default timer interval is 1 minute. If you like to change that, follow the instructions.

Bumblebee device has two deployment patterns, Pass Through and Router mode