This document describes how to access Bumblebee CPE local diagnostics portal

The Bumblebee Intelligent Edge is purpose-built to serve the telecom industry. It supports both types of service providers. The only difference in deployment is whether VLAN tags are applied to the service provider-facing WAN interface. Full visibility, troubleshooting tools, advanced service features, and cellular integration are available in either deployment scenario.

Bumblebee Shared Data Pool Alerts & Throttling monitors this monthly data allowance. It alerts enterprise admins when usage exceeds a specified threshold and can optionally throttle throughput across all sites to prevent excessive cellular data costs.

Bumblebee Static IP feature backhauls cellular data traffic to the nearest Bumblebee cloud over a secure encrypted tunnel before egressing the traffic to the destination applications.

If your organization prefers to install the Bumblebee CPE image and ship the CPE yourself, here are the steps to follow.

The SIM card must be inserted into the SIM slot in the correct orientation, and after the insertion, the device must be power rebooted for the CPE to detect the SIM.

The SIM card must be inserted into the SIM slot in the correct orientation, and after the insertion, the device must be power rebooted for the CPE to detect the SIM.

In the Bumblebee DIA architecture, data path is unchanged from the existing architecture. What is removed is the entire management network.

This document provides an example of how to configure a webhook on the Bumblebee platform.

Bumblebee Cellular WAN FAQ

The Secondary WAN provides a backup WAN link via the Bumblebee CPE's ETH3 interface to increase a site's Internet uptime. When the primary WAN (ETH0) goes down, the Bumblebee CPE automatically begins forwarding traffic through the Secondary WAN. The Secondary WAN can be from a different ISP. Below is a deployment diagram. The Secondary WAN deployment diagram Deployment Requirements The primary WAN (ETH0) should be in Pass Through Mode, for example, a /29 DIA circuit. The seco

This document explains how to create event notifications to alert all parties when an event such as WAN outage occurs.

Bumblebee troubleshooting cheatsheet

This document describes to how to deploy two firewalls for HA.

Support Center is a service on the Bumblebee platform that allows customers to file support tickets and providers to correspond with the customers on the tickets until the customers resolve them.

Application Visibility is part of the Intelligent Edge Dashboards.

The default timer interval is 1 minute. If you like to change that, follow the instructions.

Bumblebee device has two deployment patterns, Pass Through and Router mode

This document explains how to recover a CPE from a loss of connectivity or failed registration.

This document explains what post-mortem outage analysis contains and how to view it.