BN-CPE-1000 Service Features

This document lists and explains the service features supported on BN-CPE-1000. The service features are grouped together for their functionalities. Under each group is a list of the services.

BN-CPE-1000 service features

1. General Information Group

   
   

   Edit CPE Info (for BN-CPE-1000 Service Features)

   Make changes, such as CPE name, shipping address, site address, provider service ID and client circuit ID, local contact name, local contact emal, etc, to a device.

Edit Network Info

Make changes to WAN and LAN addresses of the device.

Assign Entity

Assign the device to an entity. The purpose is for IAM access control that determines who can view what information. Refer to this document for more details.

2. Performance Tests Group

Start Activation Test

The Activation Test runs at any time, it tests throughput, latency and jitter to assure the service contract. Refer to this document for more details.

Retrieve Activation Test Report

This is to retrieve the latest Activation Test report, up to 10 test results are saved.

Edit Daily Performance Test

This service allows you to run the link throughput daily so that operations team proactively monitors the WAN link condition. Test results are stored on the platform for 3 years.

3. Advanced Features Group

Edit Appflow

Enable Appflow to see applications passing through the device. It also enables application performance troubleshooting. For more information, refer to this link.

Edit Down Notification Interval

The default notification interval is 1 minute, that is, if the Bumblebee portal does not receive keep alive messages from a device for a minute, it declares it down. Use this function to make the notification time window longer in increment of a minute.

Edit IP Monitor Target

The default IP Monitor Target is the default gateway IP address. Typically this IP address is the ISP default gateway IP address. The IP Monitor Target is used for measuring latency and packet loss. Edit IP Monitor Target if you prefer a different IP target.

Edit iPerf Server

The BN-CPE-1000 can be used as iPerf server ready to receive a client traffic for iPerf performance testing.

4. DDoS Protection Suite

   To learn more about security services, refer to this link.

   
   

   Edit Geo Visibility

   Turn on this feature to see what countries are originating traffic to the CPE device and what countries your site is egressing traffic to. You'll be surprised lots of traffic is originated from not so friendly countries, many of originating source IP addresses are malicious IPs.

   
   

   Edit Block Malicious Sources

   Turn on this feature to block originating IPs with malicious score of 100.

   
   

   Edit DDoS Mitigation

   Enable this service to block TCP SYN flood, UDP flood and ICMP flood.

5. Diagnostics Group

Get Diagnostics

Get Diagnostics returns live status on the device, such as if LAN ports are connected (have carrier) and if they are in UP state.

Reset LAN Ports

Take this action if the LAN is in down state and you wish to bring it back up. Make sure the LAN port is connected.

Reset Device

Take this action if the device is up but not forwarding packets. By rebooting the device the software gets restarted.

Ping and Trace route

Use this tool to run ping and trace route to test reachability from the selected device.

6. Delete

   Take this action cautiously! This will delete the device from the database.

7. Dashboards

   Map View

   Display the summary information of the deployment and geo locations of the sites.

   
   

   WAN Link Health

   Display Uptime, WAN Link Health, Outage history, Daily Performance Assurance Tests. For more info, refer to this link.

   
   

   WAN Link Utilization

   Display link utilization, Peak Hour and Peak Hour utilization, Peak Hour utilization trend (3 years of storage). For more info, refer to this link.

   
   

   Application Performance Insights

   Application flows and each flow performance analysis and report. Identify packet loss and which network segment dropped packets. For more info, refer to this link.

   
   

   DDoS Protection Suite

   Display inbound originating sources and malicious IPs. Display blocked IPs and block DDoS attacks. For more info, refer to this link.